{"product_id":"griffon-aqua-max-white-425g","title":"GRIFFON AQUA MAX WHITE 425G","description":"\u003cp\u003eWaterproof, solvent-free assembly adhesive and sealant based on SMP polymer.\u003cbr\u003eWater resistant (chlorine \/ sea) UV resistant Very high final bond strength Very high, permanent elasticity Very good filling capacity Good strength Non-shrinking; 100% glue Solvent-free Does not stain the ends of the joints Resistant to temperatures between -40°C and +100°C Paintable\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePROPERTIES\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWater-resistant (chlorine \/ sea)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUV-resistant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVery high final bond strength\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVery high, permanent elasticity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVery good filling capacity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGood strength\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-shrinking, 100% glue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolvent-free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not stain the ends of the joints\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResistant to temperatures between -40°C and +100°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePaintable\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal For:\u003c\/strong\u003e\u003cbr\u003eFor bonding, assembling and sealing almost all materials on almost all surfaces. Extremely suitable for swimming pool construction, artificial lakes and in agriculture. Suitable for all types of applications in and around the pool, such as skimmers, edges, tiles, drains, roofs, outfall pipes and expansion joints. Also suitable for applications around artificial ponds such as drains, pipes and pond edges. Also suitable for underwater applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e\u003cbr\u003eNot suitable for Polyethylene (PE), Polypropylene (PP), Polytetrafluoroethylene (PTFE), pure plaster and asphalt. When bonding plastics always carry out an adhesion test first. Adhesion to plastics may vary depending on the type of synthetic material and the quality of the plastic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUSE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEFORE USE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking conditions\u003c\/strong\u003e\u003cbr\u003eThe ambient temperature, of the adhesive and of the materials to be bonded must not be lower than +5°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface requirements\u003c\/strong\u003e\u003cbr\u003eThe surfaces must be clean, free of dust and grease. The surface must be solid. The surface can be wet. No primer is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools\u003c\/strong\u003e\u003cbr\u003eSilicone gun and rubber mallet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e\u003cbr\u003eWith spot welding: 5-8 m²\/kg. In strips: one container yields approximately 8-15 meters of adhesive (depending on the diameter of the cutting nozzle).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIN USE\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eManagement \/ preparation of cartridge\u003c\/li\u003e\n\u003cli\u003eCut the screw thread, assemble the nozzle and cut to a diameter of at least 0.5 cm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003eGLUING: Cut the screw thread, assemble the nozzle and cut to a diameter of at least 0.5 cm. Depending on the weight of the material, apply the adhesive evenly in vertical stripes or dots at intervals of between 10 and 40 cm. Always apply adhesive in corners and along edges. Assemble the materials with a pushing motion and press or tap firmly together. Correction is still possible. For heavy materials, fasteners or supports may be required. Close the cartridge properly immediately after use. Sealing: Cut the screw thread, assemble the nozzle and cut at an angle to the desired joint width. Apply the sealant to the bottom of the joint and tool within 10 minutes using a damp finger (water with liquid soap without lemon), putty knife or silicone sanding tool. Close the cartridge properly immediately after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePoints of attention\u003c\/strong\u003e\u003cbr\u003eDue to the constantly changing water quality in swimming pools, it is not possible to state the life expectancy when the product is in prolonged contact with pool water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAFTER USE\u003c\/strong\u003e\u003cbr\u003eStains\/residues\u003cbr\u003eRemove adhesive residues immediately with white spirit. Dried adhesive residues can only be removed mechanically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage conditions\u003c\/strong\u003e\u003cbr\u003eStore in properly sealed packaging in a dry place at a temperature between +5°C and +25°C.\u003c\/p\u003e","brand":"LEO PATRIOTIS LTD","offers":[{"title":"Default Title","offer_id":57326111883644,"sku":"10054","price":7.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0580\/6070\/1805\/files\/8247.gif?v=1787145229","url":"https:\/\/homenwood.com\/products\/griffon-aqua-max-white-425g","provider":"Home\u0026Wood Home Improvement Store","version":"1.0","type":"link"}